High-Rise Fires: Causes and How to Extinguish Them

High-rise buildings present unique fire safety challenges due to their height, dense occupancy, and complex structures. From faulty electrical systems to careless human behavior, understanding the causes of high-rise fires is the first step in prevention and preparedness.

Top Causes of Fires in High-Rise Buildings

1. Electrical Malfunctions

   • Faulty wiring, overloaded circuits, and aging electrical systems are leading causes.

   • Appliances left plugged in or faulty extension cords also contribute.

2. Cooking Accidents

   • Unattended cooking in apartments or staff pantries can quickly escalate.

   • Oil and grease fires are particularly dangerous.

3. Heating Equipment

   • Portable heaters placed too close to flammable materials.

   • Malfunctioning central heating systems.

4. Smoking Materials

   • Cigarettes improperly discarded in trash chutes or near balconies.

   • Often a cause of fires during late-night hours when detection is delayed.

5. Arson and Vandalism

   • Intentional fire setting in stairwells, basements, or storage areas.

   • Sometimes linked to disputes or security lapses.

6. Flammable Materials Storage

   • Cleaning supplies, paint, and solvents stored improperly in maintenance rooms.

   • Inadequate ventilation can increase risk.

How to Extinguish Fires in High-Rise Buildings

Extinguishing fires in high-rises requires speed, knowledge, and the right equipment:

• Small Fires: Use Fire Extinguishers

  • Class A (ordinary combustibles): Use water or foam extinguishers.

  • Class B (flammable liquids): Use CO₂ or dry chemical extinguishers.

  • Class C (electrical fires): Use CO₂ or dry chemical, never water.

• Fire Hose Cabinets

  • Many high-rises have hose reels and standpipes on each floor for larger fires.

  • Only trained personnel should operate these during initial stages before the fire department arrives.

• Fire Suppression Systems

  • Automatic sprinkler systems significantly reduce fire spread.

  • Ensure these systems are maintained regularly.

• Evacuation Is Priority

  • If a fire cannot be contained immediately, evacuate using stairs (never elevators).

  • Close doors behind you to contain the fire.

Essential Fire Safety Training for Residents and Staff

1. Fire Extinguisher Training:
Learn the PASS technique:

• Pull the pin

• Aim at the base

• Squeeze the handle

• Sweep side to side

2. Evacuation Drills:
Regular drills ensure familiarity with:

• Primary and secondary escape routes.

• Designated assembly points.

• Roles for floor wardens and staff during emergencies.

3. Understanding Fire Alarm Systems:
Residents and staff should know:

• What the alarms sound like.

• How to respond immediately without panic.

• How to assist elderly or disabled occupants.

4. Basic Fire Behavior Awareness:
Training should cover:

• How quickly fires can spread in high-rise structures.

• Dangers of smoke inhalation.

• Why staying low and checking doors for heat is critical.

5. Maintenance Staff Training:
Maintenance personnel should be trained to:

• Check and maintain fire extinguishers and alarms.

• Inspect electrical and heating systems regularly.

• Ensure exits and stairwells are clear at all times.

High-rise fires are preventable with vigilance, proper equipment, and consistent training. Understanding the top causes, from electrical faults to human negligence, helps residents and building managers take proactive measures. Remember, while extinguishing small fires is possible, evacuation should always take priority when in doubt. Regular fire safety training can save lives, protect property, and ensure a safer environment for everyone in high-rise buildings.

This article was previously published on UAE Moments. To see the original article, click here